#!/bin/sh #---------------------------# # BPI-R1 VLAN configuration # #---------------------------# # # This will create the following ethernet ports: # - eth0.101 = WAN (single port) # - eth0.102 = LAN (4 port switch) # # The swconfig port number are: # |2|1|0|4| |3| # (looking at front of ports) # # You have to adjust your /etc/network/interfaces # ifconfig eth0 up swconfig dev eth0 set reset 1 swconfig dev eth0 set enable_vlan 1 swconfig dev eth0 vlan 101 set ports '3 8t' swconfig dev eth0 vlan 102 set ports '4 0 1 2 8t' swconfig dev eth0 set apply 1