#!/bin/sh
 
#---------------------------#
# BPI-R1 VLAN configuration #
#---------------------------#
#
# This will create the following ethernet ports:
# - eth0.101 = WAN (single port)
# - eth0.102 = LAN (4 port switch)
#
# The swconfig port number are:
# |2|1|0|4|  |3|
# (looking at front of ports)
#
# You have to adjust your /etc/network/interfaces
#
ifconfig eth0 up
 
swconfig dev eth0 set reset 1
swconfig dev eth0 set enable_vlan 1
swconfig dev eth0 vlan 101 set ports '3 8t'
swconfig dev eth0 vlan 102 set ports '4 0 1 2 8t'
swconfig dev eth0 set apply 1